server Integration
ibm-iseries (en)


ServicePilot server-ibm-iseries


# IBM iSeries Server

Overview

This package is designed to monitor an iSeries Server using SNMP.

Description

ServicePilot uses SNMP to monitor iSeries Server in terms of:

  • System: CPU and Memory utilization
  • Storage: Disk utilization
  • Network: Interface status and utilization

Requirements

  • SNMP Service must be configured (Security: read-only SNMP community and allowed host must be set) and started on each target device.

  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and iSeries Server
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and iSeries Server
    • UDP/162 (SNMP Trap): (Optional) Between iSeries Server and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the server-ibm-iseries package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Parameters tab:
    1. IP address/FQDN: Specify the IP address, host name or FQDN for the iSeries Server, as resolvable by the machine on which the ServicePilot Manager is running

Notes

MIB Used:

  • RFC1213-MIB2
  • HOST-RESOURCES-MIB
server ibm-iseries 0

server ibm-iseries 1

server ibm-iseries 2


We can help you

Or call us at +33 2 40 60 13 30