Integración de la tecnología de Servidor DISK-SNMP


ServicePilot server-disk-snmp


# Server Disk SNMP

Overview

This package is designed to monitor server disks using SNMP.

Description

This package automatically configures the ServicePilot Manager to collect statistics from servers in terms of disk usage based on an SNMP collection.Disks will be automatically discovered.

Requirements

  • SNMP service must be installed, configured and started on the server (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and server
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the server-disk-snmp package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

License

Object TypeLicense object ConsumedCondition
SNMP Disk1 per diskInclude and Exclude disk name filters

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:

    1. IP address/FQDN: Specify the IP address, host name or FQDN for the server, as resolvable by the machine on which ServicePilot Manager is running
  2. Monitoring Options tab:

    1. {Optional} Ignored Disks Name separated with '|': Specify name(s) of disks NOT to be monitored
    2. {Optional} Allowed Disks Name separated with '|': Specify name(s) of disks to be monitored

      Note: Each element of the ignored/allowed interface lists is a regular expression as defined by Like Operator (Visual Basic)

Notes

MIBs Used:

  • HOST-RESOURCES-V2-MIB

Podemos ayudarte

O llámenos a +33 2 40 60 13 30