Intégration de la technologie Base de donnée NETAPP

ServicePilot database-netapp

# NetApp


This package is designed to monitor a NetApp FAS2xxx appliance using SNMP.


This package automatically configures the ServicePilot Manager to collect statistics from the NetApp appliance on which SNMP service has been installed and configured. The statistics gathered in this way include:

  • System: CPU utilization
  • Storage: RAID status and volume utilization
  • Network: Interface status and utilization


  • SNMP service must be installed, configured and started on the targeted NetApp appliance (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and NetApp appliance
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and NetApp appliance
    • UDP/162 (SNMP Trap): (Optional) Between NetApp appliance and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5


Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the database-netapp package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:

    1. IP address/FQDN: Specify the IP address, host name or FQDN for the NetApp Database Server, as resolvable by the machine on which ServicePilot Manager is running
  2. Monitoring Options tab: tick to enable the different monitoring options. The options available are:

    1. ICMP Ping: tick to get a ping status
    2. Interfaces: tick to get statistics for all network interfaces
    3. File Systems: tick to get statistics for all file systems
    4. RAID Disks: tick to get statistics for all disks


MIB Used:

  • RFC1213-MIB2

Comment pouvons-nous vous aider ?

ou appelez-nous au +33 2 40 60 13 30