Intégration de la technologie Réseau FOUNDRY-ROUTER

ServicePilot network-foundry-router

# Foundry Router


This package is designed to monitor a Foundry Router using SNMP.


ServicePilot uses SNMP to monitor Foundry Router in terms of:

  • Network: Ping Response Time and Interfaces activity
  • System: CPU and memory
  • Environment: Fan, Temperature and Power Supply


  • SNMP service must be configured and started on the targeted Foundry router (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is mandatory that the network continuity is ensured. In case of a network infrastructure using a firewall, all the ports below must be opened

    • UDP/161 (SNMP): Between ServicePilot Manager and Foundry Router
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and Foundry Router
    • UDP/162 (SNMP Trap): (Optional) Between Foundry Router and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5


Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-foundry-router package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:

    1. IP address: Specify the IP address of the Foundry Router, as resolvable by the machine on which ServicePilot Manager is running
  2. Interfaces tab:

    1. Auto-Discover Interfaces: Set it on to discover interface
    2. Use Interface filter instead of Addressing Information: Set it on to get statistics for a specified list on interfaces only
    3. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    4. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitoredNote: Each element of the interface lists is a regular expression as defined by Like Operator (Visual Basic)
  3. Monitoring Options tab:

    1. Auto-Discover Fans to get statistics for all fans
    2. Auto-Discover Power Supplies Set it on to get statistics for all power supplies


MIBs Used:

  • RFC1213-MIB2




Comment pouvons-nous vous aider ?

ou appelez-nous au +33 2 40 60 13 30