network Integration
hp-procurve (en)


ServicePilot network-hp-procurve


# HP ProCurve

Overview

This package is designed to monitor a HP ProCurve switch using SNMP.

Description

This package automatically configures the ServicePilot Manager to monitor HP ProCurve switch based on an SNMP collection. The statistics gathered in this way include:

  • Network: Ping Response Time and Interfaces activity
  • System: CPU and memory
  • Environment: Chassis sensors

Requirements

  • SNMP Service must be configured (Security: read-only SNMP community and allowed host must be set) and started on the targeted machine.

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, all the ports below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and HP ProCurve
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and HP ProCurve
    • UDP/162 (SNMP Trap): (Optional) Between HP ProCurve and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager. Resources can be added to ServicePilot configuration in a number of ways:

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-hp-procurve package into the View editor and let go.
  5. The Package properties dialog box will open to allow resource configuration.
  6. Click OK to close the Package properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Add resource by changing servicepilot.conf configuration file

Resources can be added to ServicePilot configuration by directly editing the servicepilot.conf or other included YAML configuration files. The ServicePilot web interface can be used to make these changes and apply them to the running configuration.

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration.
  3. Navigate to Configuration > Edit configuration.
  4. Expand the configuration to find the provisioning: and then packages: section of the view in which the new resource will be placed.
  5. Add the example package configuration line below.
  6. Click on the green - package: word to open then Package properties dialog box to allow resource configuration.
  7. Click OK to close the Package properties dialog box. Note that the dialog box will not close if required parameters are not set.
  8. Click Save to apply the new resource to ServicePilot configuration.

Example:

- package: "network-hp-procurve;;;;;;;;network-hp-procurve;;127.0.0.1;Y;Y;Ignored Interfaces List;Allowed Interfaces List;Y"

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the package

  1. Basic Parameters tab:

    1. IP address: Specify the IP address of the HP ProCurve, as resolvable by the machine on which ServicePilot Manager is running
  2. Interfaces tab:

    1. Auto-Discover Interfaces: tick to automatically discover interfaces
    2. Use Interface filter instead of Addressing Information: tick to get statistics for a specified list on interfaces only
    3. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    4. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitored

      Note: Each element of the interface lists is a regular expression as defined by Like Operator (Visual Basic)

  3. Monitoring Options tab:

    1. Auto-Discover Sensors (Fans, Temperature & Power Supplies): tick to get statistics for all fans, temperature and power supplies

Notes

MIBs Used:

  • RFC1213-MIB2
  • NETSWITCH-MIB
  • STATISTICS-MIB
  • HP-ICF-CHASSIS
network hp-procurve 0

network hp-procurve 1