network Integration
juniper-router (en)


ServicePilot network-juniper-router


# Juniper Router

Overview

This package is designed to monitor a Juniper Router using SNMP.

Description

This package automatically configures the ServicePilot Manager to collect statistics from the Juniper Router on which SNMP Service has been configured. The statistics gathered in this way include:

  • Network: Ping Response Time and Interfaces activity
  • System: CPU and memory
  • Environment: Fan, Temperature and Power Supply

Requirements

  • SNMP service must be configured and started on the targeted Juniper Router (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, all the ports below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and Juniper Router
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and Juniper Router
    • UDP/162 (SNMP Trap): (Optional) Between Juniper Router and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-juniper-router package into the View editor and let go.
  5. The Package properties dialog box will open to allow resource configuration.
  6. Click OK to close the Package properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the package

  1. Basic Parameters tab:

    1. IP address: Specify the IP address of the Juniper Router, as resolvable by the machine on which ServicePilot Manager is running
  2. Interfaces tab:

    1. Auto-Discover Interfaces: tick to get details about interfaces
    2. Use Interface filter instead of Addressing Information: tick to get statistics for a specified list on interfaces only
    3. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    4. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitored

      Note: Each element of the interface lists is a regular expression as defined by Like Operator (Visual Basic)

  3. Monitoring Options tab:

    1. Auto-Discover Fans: tick to get statistics for all fans
    2. Auto-Discover Power Supplies: tick to get statistics for all power supplies
    3. Auto-Discover Temperature Sensors: tick to get statistics for all temperature sensors

Notes

MIBs Used:

  • RFC1213-MIB2
  • JUNIPER-MIB
network juniper-router 0

network juniper-router 1