Integration de la technologie Réseau ROUTING-PROTOCOL


ServicePilot network-routing-protocol


# Routing Protocols

Overview

This package is designed to discovered and monitor OSPF and BGP Peers using SNMP.

Description

This package automatically configures the ServicePilot Manager to discover and monitor OSPF or BGP Peers* configured in Router using SNMP**.

Requirements

  • SNMP service must be configured and started on the targeted Router (Security: read-only SNMP and allowed host must be set).

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, all the ports below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and the Router
    • UDP/162 (SNMP Trap): (Optional) Between the Router and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-routing-protocol package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Parameters tab:
    1. IP Address: Specify the IP address of the Router, as resolvable by the machine on which ServicePilot Manager is running
    2. Routing Protocol: Specify either OSPF or BGP routing
    3. {Optional} Ignored Neighbor separated with '|': List any neighbors to ignore

Note: Each element of the ignored list is a regular expression as defined by Like Operator (Visual Basic)

Notes

MIB Used:

  • BGP4-MIB
  • OSPF-MIB

Nous pouvons vous aider

ou appelez-nous au +33 2 40 60 13 30