Integration de la technologie Réseau KEMP-LOAD-BALANCER


ServicePilot network-kemp-load-balancer


# KEMP Load Balancer

Overview

This package is designed to monitor a KEMP Load Balancer appliance using SNMP.

Description

Based on an SNMP collection, this package automatically configures the ServicePilot Manager to collect statistics from the KEMP Load Balancer appliance in terms of:

  • System
  • Real Servers
  • Virtual Services
  • Network Interfaces (will be automatically discovered)

Requirements

  • SNMP service must be installed, configured and started on the targeted KEMP Load Balancer (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and KEMP Load Balancer
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and KEMP Load Balancer
    • UDP/162 (SNMP Trap): (Optional) Between KEMP Load Balancer and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-kemp-load-balancer package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

  1. In General tab, use Policies to specify SNMP parameters and thresholds

  2. Basic Parameters tab:

    1. IP address/FQDN: Specify the IP address, host name or FQDN for the KEMP Load Balancer, as resolvable by the machine on which ServicePilot Manager is running
  3. Monitoring Options tab:

    1. Kemp LoadBalancer Type: Set to Cluster if this is a Load Master or Cluster Node to just get local system statistics.
    2. ICMP: Set it on to get Ping status.
  4. Interfaces tab:

    1. InterfaceEnable: Set it on to get statistics for Interfaces.
    2. Use Interface filter instead of Addressing Information: tick to get statistics for a specified list on interfaces only. Set it off to get statistics for all available interfaces
    3. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    4. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitored
    5. {Optional}Custom interface speed separated with '|': Specify speed of the interface

Notes

MIBs Used:

  • B100-MIB

Nous pouvons vous aider

ou appelez-nous au +33 2 40 60 13 30