Integración de la tecnología de Voip CISCO-GATEWAY


ServicePilot voip-cisco-gateway


# Cisco VoIP Gateway

Overview

The ServicePilot Manager Cisco Gateway package collects information for Cisco Gateways using SNMP.

Description

This package automatically configures the ServicePilot Manager to collect statistics from the Cisco Gateway on which SNMP Service has been configured. The statistics gathered in this way include:

  • Trunk Usage form ISDN or CAS Channel interface
  • ISDN Calls
  • ISDN Line status
  • Network Interface statistics

Requirements

  • SNMP must be configured and started on each Cisco Gateway (Security: SNMP v2c read-only access from the ServicePilot Manager IP address)

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, the port below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and Cisco Gateway
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and Cisco Gateway
    • UDP/162 (SNMP Trap): (Optional) Between Cisco Gateway and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the voip-cisco-gateway package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:

    1. IP address/FQDN: Specify the IP address, host name or FQDN for the Cisco Gateway, as resolvable by the machine on which ServicePilot Manager is running
  2. Interfaces tab:

    1. Interfaces: tick to get details about interfaces
    2. Use Interface filter instead of Addressing Information: tick to get statistics for a specified list on interfaces only. Set it off to get statistics for all available interfaces.
    3. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    4. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitored
    5. {Optional} Custom interface speeds (bps) separated with '|': For network interfaces that do not report correct maximum interface speeds in bps or if the speed reported does not reflect known downstream bottlenecks, a | separated list of speed overrides can be included here. Each element of the list consists of an SNMP interface table index or name or alias, an outgoing speed and an incoming speed, comma separated.

      Note: Each element name in the list is a regular expression as defined by Like Operator (Visual Basic)

  3. Resources tab:

    1. ICMP Ping: tick to get ping (availability and response time) statistics for the Cisco Gateway
    2. System: tick to get system statistics.
    3. Fans: tick to get statistics for all fans.
    4. Power Supplies: tick to get statistics for all power supplies.
    5. Temperature Sensors: tick to get statistics for all temperature sensors.
  4. Monitoring Options tab:

    1. ISDN: tick to discover and monitor ISDN interfaces
    2. ISDN Calls: tick to get additional information (call type and calling numbers) for each call
    3. CAS Channel: tick to discover CAS Channel interfaces
    4. DS1 Lines: tick to get details about ISDN Signalling Status whether it is free or not
    5. DSP: tick to get details about DSPs
Voip CISCO-GATEWAY 0

Voip CISCO-GATEWAY 1


Cómo podemos ayudarle ?

O llámenos a +33 2 40 60 13 30