Intégration de la technologie Réseau LINKPROOF

ServicePilot network-linkproof

# LinkProof


This package is designed to monitor a RadWare LinkProof Multi-WAN Switch using SNMP.


This package automatically configures the ServicePilot Manager to collect statistics from the *LinkProof Multi-WAN Switch on which SNMP Service has been configured. The statistics gathered in this way include:

  • Network: Ping Response Time and Links availability
  • System: CPU and Network utilization


  • SNMP service must be configured and started on the targeted LinkProof Multi-WAN Switch (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, all the ports below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and LinkProof Multi-WAN Switch
    • UDP/162 (SNMP Trap): (Optional) Between LinkProof Multi-WAN Switch and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5


Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-linkproof package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Parameters tab:
    1. IP address: Specify the IP address of the LinkProof, as resolvable by the machine on which ServicePilot Manager is running


  1. Monitored links can be Applications Servers or Next Hop Routers
  2. Backup links are not monitored

  3. MIBs Used:

    • MLB-MIB

Comment pouvons-nous vous aider ?

ou appelez-nous au +33 2 40 60 13 30