Intégration de la technologie Application IP-ROUTE-ANALYSIS

ServicePilot application-ip-route-analysis

# IP Route Analysis


This package aims at monitoring the reachability of a specific IP Address.


This package automatically configures the ServicePilot Agent in order to check the reachability of a specific IP Address by:

  • Listing the intermediary IP addresses that can be found on the route to the destination
  • Testing its response time


  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • ICMP: Between ServicePilot Agent and target IP address
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 9.1
    • ServicePilot Agent minimum version: 9.1 installed and configured


Before adding a resource to monitor, make certain that all pre-requisites are in place and that ServicePilot Agent is communicating correctly with the ServicePilot Manager. Resources can be added to ServicePilot configuration using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the application-ip-route-analysis package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.
  8. Check if the object has been created in your map and that indicators are populated after a few minutes.


Object TypeLicense object ConsumedCondition
IP Route1

Key field notes

  1. In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  2. Parameters tab:

    1. Target IP address/FQDN: IP address, host name or FQDN for the target, as resolvable by the machine on which the ServicePilot Agent is running.
    2. Packet Size (bytes) (Optional) Specify the size of the packets. The 32 bytes default can be increased as required.
    3. Timeout (ms) Set the timeout. The 500 millisecond default can be increased as required.
    4. Polling Frequency (sec) Set the polling interval. The 60 second default can be increased as required.
    5. DiffServ: Use this DiffServ value when making the IP Route connection.

Note DiffServ is only available when using a ServicePilot Linux .NET Core Agent.



Comment pouvons-nous vous aider ?

ou appelez-nous au +33 2 40 60 13 30