IT monitoring
with the HWG-STE2 package


ServicePilot misc-hwg-ste2


What is HW Group STE2 Sensor?

HWg-STE2 is the second version of the HW Group STE Sensor. It uses the SNMP protocol to measure temperature and humidity from external sensors. STE2 can connect up to three sensors via 1-Wire and up to two detectors via digital inputs for dry contacts. To monitor the device remotely, it can be configured via a built-in web server.

HW Group STE2 Sensor monitoring

This package monitors an HW Group STE2 sensor.

This package uses SNMP to monitor an HW Group STE2 probe using SNMP counters.

The monitoring statistics gathered in this way include:

  • HWg STE2 Sensor Discovery (syslocation, infoAddressMAC...)
  • HWg STE2 Sensor Percentage (sensState, Alarm, Range...)
  • HWg STE2 Sensor Temperature (Value, State, Alarm, Range...)
  • HWg STE2 Sensor Input (Value, State...)

IT monitoring and hwg-ste2 in a few minutes

1Use your OnPremise installation or create a SaaS account.
2Install an Enterprise Agent or use an existing one.
3Define a new resource hwg-ste2 via the web interface, the target agent will be provisioned automatically.
active directory usersapacheconsuldhcpdhcp windowsdnsdotnetdynatrace processhaproxyiisip route analysisjavajolokialighthousemicrosoft active directory 201xmicrosoft exchange 2013nginxnightwatchnodejsnrpe ldapphpfpmpostfixpuppeteerrabbitmqremote commandsalesforceservicepilot agentssikulix scenariosikulix schedulertcptomcatveeam backupwindows certification authorityakcp sensorats apcavocent acshwg stemqttprinterred object countsearchspproxytask projecttask salesups apcups eatonups hpups mgeups rittal