CHECKPOINT-FIREWALL network technology integration


ServicePilot network-checkpoint-firewall


# Checkpoint Firewall

Overview

This package is built to monitor Checkpoint Firewall devices using SNMP. Statistics are collected for a single device , in order to provide an overall view of the status and health of the different system and board components of the device.

Description

This package automatically configures the ServicePilot Manager to collect statistics from the Checkpoint Firewall on which SNMP Service has been configured. The statistics gathered in this way include:

  • System: CPU, memory and Disk
  • Interfaces activity (interfaces will be automatically discovered)
  • Fan, Temperature and Power Supply

Requirements

  • SNMP Service must be configured (Security: read-only SNMP community and allowed host must be set) and started on each target device.

  • Network Flows - It is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure with a firewall, all of the following flows must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and Checkpoint Firewall
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and Checkpoint Firewall
    • UDP/162 (SNMP Trap): (Optional) Between Checkpoint Firewall and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-checkpoint-firewall package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

License

Object TypeLicense object ConsumedCondition
Firewall Summary1
System Information1
ICMP Ping1If Ping enabled
HA Diagnostics1If HA Diagnostics enabled
Network Interfaces1 per interface monitoredIf Enable Interface Monitoring enabled and interfaces selected
Fans1 per fan table entryIf Fans enabled
Power Supplies1 per power supply table entryIf Power Supplies enabled
Temperature Sensors1 per temperature sensor table entryIf Temperature Sensors enabled
CPUs1 per CPU table entryIf Multiple CPUs enabled
Disks1 per disk table entryIf Multiple Disks enabled

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:

    1. IP address: Specify the IP address of the Checkpoint Firewall, as resolvable by the machine on which ServicePilot Manager is running
  2. Interfaces tab:

    1. Enable Interface Monitoring: tick to get statistics for the following interfaces.Set it off not to get statistics for interfaces.
    2. {Optional} Ignored Interfaces names separated with '|': Specify name(s) of interface(s) NOT to be monitored
    3. {Optional} Allowed Interfaces names separated with '|': Specify name(s) of interface(s) to be monitored
  3. Monitoring Options tab:

    1. Fans: tick to get statistics for all fans
    2. Power Supplies: tick to get statistics for all power supplies
    3. Temperature Sensors: tick to get statistics for all temperature sensors
    4. Multiple CPUs: tick to get statistics for individual CPUs
    5. Multiple Disks: tick to get statistics for individual disks
    6. HA diagnostics: tick to get high availability status information
    7. Ping: tick to include a Ping object

Note: Each element of the ignored/allowed interface lists is a regular expression as defined by Like Operator (Visual Basic)

Notes

MIB Used:

  • CHECKPOINT-MIB

We can help you

Or call us at +33 2 40 60 13 30