JUNIPER-COS network technology integration


ServicePilot network-juniper-cos


# Juniper COS

##Overview

This package is designed to provide statistics about Juniper COS using SNMP.

Description

This package automatically configures the ServicePilot Manager to collect statistics from the Juniper COS on which SNMP Service has been configured. The statistics gathered in this way include:

  • Network: Ping Response Time and Interfaces activity

Requirements

  • SNMP service must be configured and started on the targeted Juniper COS (Security: read-only SNMP community and allowed host must be set).

  • Network Flows - It is is necessary to ensure network connectivity between ServicePilot and the monitored device. In case of a network infrastructure using a firewall, all the ports below must be opened:

    • UDP/161 (SNMP): Between ServicePilot Manager and Juniper COS
    • ICMP/Echo Request (Ping): Between ServicePilot Manager and Juniper COS
    • UDP/162 (SNMP Trap): (Optional) Between Juniper COS and ServicePilot Agent
  • ServicePilot Requirements

    • ServicePilot Manager minimum version: 8.5

Installation

Before adding a resource to monitor, make certain that all pre-requisites are in place and if a ServicePilot Agent is required, that it is communicating correctly with the ServicePilot Manager.

Add resource using Views Configuration web interface

  1. As an administrative user of ServicePilot, open the ServicePilot web interface.
  2. Navigate to Administration. The Configuration > Views web page will open.
  3. Click on the view in which to place the new resource in the Views hierarchy on the left of the interface. The View editor section will show the existing view contents.
  4. From the Packages list on the right of the interface, click and drag the network-juniper-cos package into the View editor and let go.
  5. The Resource properties dialog box will open to allow resource configuration.
  6. Click OK to close the Resource properties dialog box. Note that the dialog box will not close if required parameters are not set.
  7. Click Save to apply the new resource to ServicePilot configuration.

Key field notes

In the Monitoring Policies tab, specify the policy or policies to apply to the resource

  1. Basic Parameters tab:
    1. IP address: Specify the IP address of the Juniper COS, as resolvable by the machine on which ServicePilot Manager is running
    2. Comma separated list of interface indices (Optional): Specify the index of the interface to be monitored, separated by commas (,)

We can help you

Or call us at +33 2 40 60 13 30